Yes, Tebang offers comprehensive technical support for spray application, including:
Documentation Package: Each order includes a detailed Water-based Non-stick Coating Spraying Flowchart covering pre-treatment, application parameters (viscosity/temperature/film thickness), curing conditions, and key process steps;
Video Tutorials: High-definition operation videos (available via official website download or customer service request) demonstrating equipment setup, spray gun operation, and troubleshooting for…
Yes, Tebang water-based non-stick coatings offer flexible customization services, including:
Color Customization: We can formulate exclusive colors based on your provided color cards, samples, or Pantone color numbers;
Performance Customization: Tailored solutions for heat resistance, adhesion, gloss, and other performance indicators based on your application scenarios (e.g., kitchenware, home appliances, building materials);
Sample-based Customization: Support…
The delivery time for Tebang water-based non-stick coatings in international transactions is typically influenced by transportation method, destination country, and customs clearance efficiency. General reference timelines are as follows:
Sea Freight: 30-60 working days (including booking, transportation, and destination customs clearance)
Air Freight: 7-15 working days (suitable for urgent orders; specific timelines depend on the…
You can contact us through the following three methods for ordering negotiations:
Website Contact: Visit the contact page on our official website, submit your email and contact information, and we will assign a dedicated representative to assist you;
Phone Contact: Directly call our service hotline: +86-135 1579 5061;
Email Contact: Send your inquiry to our…
Defect NamePhenomenonReasonSolution reference planShrinkage cavityThe appearance of small circular pits or tiny white spotsThe substrate has oil stainsClean the substrateAdd improper diluent Replace the thinnerThe temperature is low, making it difficult for the paint to level smoothly.Preheat the substrate to 35-50°C before constructionThere is water, oil, etc., in the air pipe or spray gun.Drain water…
Substrate treatment
The substrate needs to be polished (for aluminum parts) or phosphated (for iron parts), or treated with sandblasting (for better coating adhesion).
Sandblasting
We recommend that the particle size of the sand grains be between 90-120#, and please control the speed and angle of the spray when spraying. A suitable roughness (recommended between…
Step 1.
Pour solution C and D into solution B and mix thoroughly; Then fully roll stirring (300r/min stirring for 20min).
At the same time, the A solution is roller-stirred until there is no more precipitate (300r/min>20min).
Step 2.
The BCD mixture was poured into solution A and rolled(300r/min) maturation;
Maturation time: Summer: 8h, Winter:…
Application process
Requirement on pre-treatment
①. Firstly, degreasing at high-temperature, then wash with 1%~3% NaOH solution (60℃) for more than 6 minutes, dry it after water rinsing;
②. Blast with 80#~120# corundum to make the surface roughness reach 2.0 μ ~3.0μ, pay attention to sandblast evenly;
③. Wash with 1%~3% NaOH solution(60℃) for more than…
Application process
Requirement on pre-treatment
①. Firstly, degreasing at high-temperature, then wash with 1%~3% NaOH solution (60℃) for more than 6 minutes, dry it after water rinsing;
②. Blast with 80#~120# corundum to make the surface roughness reach 2.0 μ ~3.0μ, pay attention to sandblast evenly;
③. Wash with 1%~3% NaOH solution(60℃) for more than…
It is very important to shake (stir) thoroughly before spraying.Paint can separate and settle over time, so thorough stirring is crucial. If the paint is not shaken before spraying, the coating may be noticeably uneven or have surface defects such as particles.
Therefore, we recommend rolling the paint and using a paint shaker before…
