Ceramic non-stick coatings may have different performance …
TEBANG focuses on developing water-based coatings, keeping us at the forefront of product compliance, sustainability, and innovation.
TEBANG focuses on producing waterborne coatings and …
Yes, Tebang offers comprehensive technical support for spray application, including:
Documentation Package: Each order includes a detailed Water-based Non-stick Coating Spraying Flowchart covering pre-treatment, application parameters (viscosity/temperature/film thickness), curing conditions, and key…
Yes, Tebang water-based non-stick coatings offer flexible customization services, including:
Color Customization: We can formulate exclusive colors based on your provided color cards, samples, or Pantone color numbers;
Performance Customization:…
The delivery time for Tebang water-based non-stick coatings in international transactions is typically influenced by transportation method, destination country, and customs clearance efficiency. General reference timelines are as follows:
Sea…
You can contact us through the following three methods for ordering negotiations:
Website Contact: Visit the contact page on our official website, submit your email and contact information, and we…
Defect NamePhenomenonReasonSolution reference planShrinkage cavityThe appearance of small circular pits or tiny white spotsThe substrate has oil stainsClean the substrateAdd improper diluent Replace the thinnerThe temperature is low, making it…
Substrate treatment
The substrate needs to be polished (for aluminum parts) or phosphated (for iron parts), or treated with sandblasting (for better coating adhesion).
Sandblasting
We recommend that the particle…
Step 1.
Pour solution C and D into solution B and mix thoroughly; Then fully roll stirring (300r/min stirring for 20min).
At the same time, the A solution is roller-stirred…
Application process
Requirement on pre-treatment
①. Firstly, degreasing at high-temperature, then wash with 1%~3% NaOH solution (60℃) for more than 6 minutes, dry it after water rinsing;
②. Blast with…
Application process
Requirement on pre-treatment
①. Firstly, degreasing at high-temperature, then wash with 1%~3% NaOH solution (60℃) for more than 6 minutes, dry it after water rinsing;
②. Blast with…
